Browsing by Author "Mensah-Brown, H."

Now showing 1 - 4 of 4

Application Of ISO 22000 In Comparison With HACCP On Industrial Processing Of Milk Chocolate
(International Food Research Journal, 2013) Afoakwa, E. O; Mensah-Brown, H.; Crentsil, G. K.; Frimpong, K.; Asante, F.
Hazard analysis was conducted to identify critical control points (CCPs) during cocoa processing and milk chocolate manufacture and applied into a hazard analysis and critical control point (HACCP) plan. During the process, the different biological, physical and chemical hazards identified at each processing stage in the hazard analysis worksheet were incorporated into the HACCP plan to assess the risks associated with the processes. Physical hazards such as metals, stones, fibres, plastics and papers; chemical hazards such as pesticide residues, mycotoxins and heavy metals; and microbiological hazards such as Staphyloccous aureus, coliforms, Salmonella, Aspergillus and Penicillium were identified. ISO 22000 analysis was conducted for the determination of some pre-requisite programmes (PrPs) during the chocolate processing and compared with the HACCP system. The ISO 22000 Analysis worksheet reduced the CCPs for both cocoa processing and chocolate manufacture due to the elimination of the pre-requisite programmes (PrPs). Monitoring systems were established for the CCPs identified and these included preventive measures, critical limits, corrective actions, assignment of responsibilities and verification procedures. The incorporation of PrPs in the ISO 22000 made the system simple, more manageable and effective since a smaller number of CCPs were obtained.
Calculation Of Interfacial Tensions Between Macromolecular Solutions And Soltrol-130 From Contact Angles Measurements
(ARPN Journal of Engineering and Applied Sciences, 2013-02) Sinayobye, E.; Mensah-Brown, H.; Yaya, A.; Kakane, V. C. K.; Baryeh, E. A.
The determination of the surface tension of some liquids or solutions has been carried out using a tensiometer. The determination of the contact angle between the liquids and a planar surface has also been carried out using photography. Polar and dispersive contributions of the surface tension were obtained by calculation while the polarities of the liquids and solutions were determined applying Wu equations. This method gave the different results for solutions prepared from macromolecular compounds (acroleine - ethanolamine macromolecular solution 1g/l, acroleine - diethanolamine macromolecular solution 1g/l, polyglutaraldehyde-ethanolamine macromolecular solution 0.7 g/l and polyglutaraldehyde - diethanolamine macromolecular solution 1 g/l) synthesized by Malonda from glutaraldehyde and acroleine. The dispersive and polar contributions of the surface tension were computed and used to calculate the interfacial tensions of solutions by the simple measurement of the contact angle. The results have revealed that the computed interfacial tensions were comparable to the values measured directly by the tensiometer for polyglutaraldehyde- ethanolamine macromolecular solution 0.7 g/l and polyglutaraldehyde - diethanolamine macromolecular solution 1 g/l) making an interface with Soltrol-130 of 17.1 and 16.9 dynes/cm compared to direct measured values of 17.2 and 17.7 dynes/cm respectively representing 1% and 5% error, respectively.
The Fermentation Characteristics Of Single And Mixed Yeast Cultures During Pito Wort Fermentation
(International Food Research Journal, 2015) Avicor, M. N.; Saalia, F. K; Djameh, C.; Sinayobye, E.; Mensah-Brown, H.; Essilfie, G.
Pito is an alcoholic beverage obtained through yeast fermentation of the wort extracted from sorghum malt. The production methods are largely artisanal and the product quality varies from batch to batch even for the same brewer. The use of starter culture is a plausible approach to minimizing the variability in product quality. This work compared the fermentation profile of single yeast and mixed yeast cultures in sorghum wort fermentation during pito production. A 2 x 3 factorial design was used to study the quality characteristics of wort pitched with single and mixed Culture yeast strains during 24, 48 and 72 hours alcoholic fermentation. The physicochemical properties, microbial load and sensory characteristics of samples were determined. Fermentation time had significant effects (p<0.05) on the pito characteristics. Pito color (of 12.5 and 16.5 EBC units) was different for single and mixed cultures respectively. Panelists perceived the colours of pito obtained from single yeast culture fermentation to be different from that obtained from mixed culture fermentation. Volatile aroma compounds identified during the fermentation period included esters (4), aldehydes (3), organic acids (2), alcohols (3) and a diacetyl. Both single and mixed cultures showed similar characteristics during wort fermentation.
The Influence Of Blanching, Anti-Browning Agent And Processing Time On Some Physico-Chemical Properties And Appearance Of Green Peppers (Capsicum Sinensis) During Canning
(African Journal of Food, Agriculture, Nutrition and Development, 2014-05) Mensah-Brown, H.; Afoakwa, E. O.; Hinneh, M.
Central Composite Rotatable Design (CCRD) was used to generate twenty combinations of these factors: blanching time, processing time and sodium metabisulphite concentration. The optimized conditions were then adapted for the canning process of green pepper. Blanching time ranged from 0-1 min whereas processing time and sodium metabisulphite concentration ranged from 10-30 min and 0-0.2%, respectively. The canned products were analyzed for physico-chemical qualities using standard analytical methods. Results obtained from various physico-chemical analyses showed variable trends and influences of the linear, quadratic and exponential interactions on the measured quality indices such as pH of the drained liquid, drained weight of the canned product, leached solids and colour of the canned products. The results showed significant (p≤0.05) quadratic effect of sodium metabisulphite as well as linear effect of blanching time on the drained weight of the canned green pepper. Generally, the pH of the medium decreased (increased acidity) with increasing processing time, which was also positively associated with the extent or amount of leaching. Additionally, all three factors were observed to have affected (to variable extent) the colour of the canned products. Blanching and processing times also affected the degree of browning. There was a strong significant (p≤0.05) influence of the quadratic factors of blanching time, processing time and sodium metabisulphite concentration on the colour properties (a-values, b-values and L-values) of the canned products. Statistical analysis showed significant (p≤0.05) linear effects of blanching time and sodium salt concentration as well as the combined effect of both factors on all the colour properties. All the studied parameters had significant regression coefficients (p≤0.05) suggesting the studied parameters contributed significantly to the observed changes. Colour of the canned products changed from green toward redness with increasing blanching time at all concentrations of sodium metabisulphite. Optimal processing combination of 0 min blanching time, 10 min processing time and sodium metabisulphite concentration of 0.2% produced a highly acceptable canned pepper product with preferred physico-chemical and appearance properties.